Plumbing questions, useful answers

Understand the problem. Know what to ask next.

Find practical answers about leaks, toilets, water heaters and drains, plus what to expect when requesting plumbing help.

N&M Plumbers connects homeowners with independent providers. Availability, pricing and appointment times are confirmed by your provider.

Use these answers to prepare. Plumbing systems and equipment differ. Follow the instructions for your model and ask a qualified provider to inspect problems that need diagnosis. This page offers general homeowner information.

Leaks, fixtures & water use

Start with what you can observe.

How can I check for a toilet leak I cannot hear?

EPA WaterSense suggests adding a couple of drops of food coloring or a dye tablet to the toilet tank and waiting 10 minutes. If color appears in the bowl, water is leaking from the tank into the bowl. Flush afterward to help prevent staining.

This check identifies a leak, rather than every possible cause. If you are unsure about the repair, share the result with a plumber.

Source: EPA WaterSense home maintenance guidance.

My toilet keeps running. Does it always need replacement?

A running toilet can have serviceable internal components. EPA notes that worn flappers and other parts can cause problems. Ask the provider to identify the fault and explain repair options before deciding to replace the entire fixture.

Note whether it runs continuously, refills between uses or only has trouble after flushing. EPA toilet maintenance guidance.

Could a higher water bill mean I have a leak?

It can be a clue. EPA recommends comparing water use with the same month of the previous year and asking your utility about leak alerts. Consider changes in household or outdoor water use as well; a bill alone does not locate a leak.

Write down the dates, usage change and any visible drips or wet areas. EPA guidance on identifying leaks.

What should I tell a plumber about a dripping faucet or a wet cabinet?

Identify the fixture and where the water appears. Note whether it happens constantly, when the faucet runs or after water drains from the sink. Mention recent fixture work and share a clear photo if requested.

Ask whether locating the source is included in the visit fee and whether any access or cabinet repairs would be separate. See leak and pipe service questions.

How should I describe a water-pressure problem?

Note which fixtures are affected, whether the change is sudden or recurring, and whether it affects hot water, cold water or both. Record when it happens and any recent plumbing work.

These observations help describe the problem; they do not establish its cause. Ask the provider what measurements or inspection would be needed.

Hot water & equipment

Ask about the cause before choosing a solution.

Does water near a water heater mean the tank has failed?

Not necessarily. A. O. Smith describes several possible sources, including connections, valves and condensation. Water nearby does not by itself prove that the tank needs replacement.

Arrange an assessment and have the model information ready. Follow your equipment manual for model-specific instructions instead of applying a universal shutoff or repair procedure.

Source: A. O. Smith water heater leak guidance.

Should I repair or replace my water heater?

Ask what has failed, whether that component can be repaired, and how the repair compares with a replacement proposal. Share the model, approximate age, repair history and any warranty information.

For replacement, clarify equipment, installation work, removal, permits and equipment-versus-labor warranty terms. Explore water heater service questions.

What information helps when hot water is inconsistent?

Describe whether the issue occurs at one fixture or throughout the home, when it happens and whether it follows a period of heavy use. Include the heater type and any displayed error message.

Ask what can be assessed from those details and what requires a visit. Avoid assuming that a different-size heater is the answer before the system is evaluated.

Clogs, disposal care & line inspections

Make recurring problems easier to investigate.

Can I pour cooking grease into a garbage disposal?

Keep grease and fat out of the disposal and drains. InSinkErator warns that they can accumulate in pipes and contribute to blockages. Follow your model’s care instructions for food types and operating procedures.

Source: InSinkErator installation, care and use manual (PDF).

Should I use chemical drain opener in a disposal?

The cited InSinkErator manual excludes caustic drain cleaners and similar products from the disposal. Consult your own model’s instructions. If a product has already been used, tell the service provider what it was before they begin work.

For a jam or malfunction, use the manufacturer’s instructions or request service; never put your hand into the disposal. Manufacturer care and safety instructions (PDF).

My drain keeps clogging. What should I ask about?

Keep a short record of which fixtures are affected, how long the last clearing helped and what work was performed. Ask whether the next visit is for another clearing, an inspection or both.

Request an explanation of the findings and any proposed additional work. A recurring clog alone does not establish the exact cause. See drain service questions.

Can tree roots always be cut out of a sewer or storm-water pipe?

Ask the provider to assess the pipe and explain whether root removal is appropriate for its condition. Do not assume one method is suitable for every pipe material or damaged section.

Ask whether a camera inspection is needed, what the findings show, and whether the proposed work addresses the immediate blockage, a damaged pipe or both.

What should a camera-inspection quote explain?

Ask which line will be inspected, how it will be accessed and whether the quoted price includes any necessary clearing. Confirm whether you will receive footage, still images or a written explanation of the findings.

For a repair proposal, ask the provider to connect the recommended work to the inspection findings. Explore sewer and water-line questions.

Hiring & service requests

Know what to confirm before scheduling.

Does N&M Plumbers perform the work?

N&M Plumbers is a nationwide connection resource. Independent providers inspect plumbing systems and perform the work they agree to provide. Confirm the business you will be hiring and its service terms directly.

Learn about N&M Plumbers.

Are quotes and service calls free?

Fees vary by provider and request. Ask whether there is a trip, inspection, diagnostic or after-hours charge and what it includes. Requesting a quote does not mean an on-site visit is free.

Does submitting the form book an appointment?

No. A request begins the conversation. Service coverage, the appointment and any applicable charges need to be confirmed with the provider.

See how the request process works.

Can I get same-day or emergency service?

Call to ask about the earliest appointment and whether the provider handles your request. Availability and response times vary. Confirm any after-hours fee before agreeing to a visit.

What should I compare in two plumbing estimates?

Compare the written scope, materials, labor, exclusions, permits, access, cleanup and restoration responsibilities. Ask how additional work is priced and approved, and review warranty terms.

Check that the proposals cover the same work before comparing the totals.

Have a question about your own plumbing?

Share your location and what you are seeing, or call to ask about available service.

Request plumbing help →

Maintenance sources

Equipment instructions vary by model. Source organizations have not reviewed or endorsed this page.